Garbage disposal common problems and solutions
Problem: You can't turn on the motor
| Cause | Solution |
|---|---|
|
No power |
Check the fuse box/circuit breaker. And if the disposal is plugged into a wall outlet, check the outlet |
|
On/off switch is defective |
On continuous-feed models, check the wall switch. On batch-feed models, check the stopper switch |
|
Overload protector switch is tripped |
If the flywheel is jammed, free it. Then push the reset button |
Problem: Motor hums but unit doesn't grind
| Cause | Solution |
|---|---|
|
Flywheel is jammed |
Free the flywheel |
|
Motor bearings have frozen |
Call a qualified professional. You'll probably have to buy a new unit |
Problem: The disposal grinds things too slowly
| Cause | Solution |
|---|---|
|
Not enough water |
Run more cold water when using the disposal |
|
Improper waste in the unit |
Only dispose of materials allowed by the manual |
|
Dull shredder ring or broken flyweights |
Replace defective parts |
Problem: The disposal is making an unusual amount of noise
| Cause | Solution |
|---|---|
|
Metallic object in the unit |
Inspect the unit and fish out the object with tongs or forceps |
|
Mounting screws are loose |
Tighten the mounting screws |
|
Flyweight is broken |
Replace the broken flywheel |
|
Motor is defective |
Call a qualified professional |
Version: P04192006U05102006
